Carbonarm Osmo Action Case

  • RM0.00
    Unit price per 
Shipping calculated at checkout.


Anticorodal aluminum Case for Osmo Action, the new born of DJI's Osmo series. 100% Made in Italy, produced by Carbonarm, guaranteed up to -250 meters. Plus Point: Double seals O-ring, Striker and Radial. Prepared for external battery pack, vacuum system, video output and remote control. Double thread for M6 screws or 1/4 Kodak.

Housing is made of aluminum, anodized with 50 micron military treatment to guarantee maximum resistance against wear and salt over time.

This case is shaped according to the new Osmo Action for DJI.

All the controls are shown externally with extreme precision.

The side hinge allows it to be opened and closed very easily.

Presence of a double O-ring seal, a zinc for protection against galvanic currents, and a predisposition cap for external battery pack, vacuum system, video output and remote control.

Arrangement for Filter Accessories and Additional Lenses.

On the upper part there is a threaded blind hole M6 with locking pin, this allows you to implement any accessories or insert an SF / M6 ball that will allow you to add any accessory light.

In the lower part the case is equipped with 5 threaded holes, 2 with metric pitch M6, 2 with Kodak pitch 1/4, which allows you to easily fix the case to a possible tilt bracket. There is a central Kodak pitch hole 1/4.

2 Years Warranty.

 

Maximum Guaranteed Depth: 250 m

Body: Anticordal Anodized Aluminum 50 micron

Length: 11.3 cm

Width: 6.6 cm

Thickness: 5.5 cm

Weight: 360 gr

Immersion weight: 100 gr

Anticorodal aluminum Case for Osmo Action, the new born of DJI's Osmo series. 100% Made in Italy, produced by Carbonarm, guaranteed up to -250 meters. Plus Point: Double seals O-ring, Striker and Radial. Prepared for external battery pack, vacuum system, video output and remote control. Double thread for M6 screws or 1/4 Kodak.

Housing is made of aluminum, anodized with 50 micron military treatment to guarantee maximum resistance against wear and salt over time.

This case is shaped according to the new Osmo Action for DJI.

All the controls are shown externally with extreme precision.

The side hinge allows it to be opened and closed very easily.

Presence of a double O-ring seal, a zinc for protection against galvanic currents, and a predisposition cap for external battery pack, vacuum system, video output and remote control.

Arrangement for Filter Accessories and Additional Lenses.

On the upper part there is a threaded blind hole M6 with locking pin, this allows you to implement any accessories or insert an SF / M6 ball that will allow you to add any accessory light.

In the lower part the case is equipped with 5 threaded holes, 2 with metric pitch M6, 2 with Kodak pitch 1/4, which allows you to easily fix the case to a possible tilt bracket. There is a central Kodak pitch hole 1/4.

2 Years Warranty.

 

Maximum Guaranteed Depth: 250 m

Body: Anticordal Anodized Aluminum 50 micron

Length: 11.3 cm

Width: 6.6 cm

Thickness: 5.5 cm

Weight: 360 gr

Immersion weight: 100gr